Cast Iron Body Check Valves

DFT’s Cast Iron GLC® Check Valve offers minimum pressure loss performance along with silent operation. This non-slam valve is center-guided, spring-assisted, and is capable of handling a wide range of temperature/pressure combinations along with a variety of system fluids. Each valve is constructed with a body, seat, spring, disc with stem and guide bushing, and specific models are available with O-ring or gasket body seals.

As its name implies, cast iron is the material used to create the body of the GLC® Silent Check Valve, and either bronze or 316 stainless steel is available for the trim. The valve is made with a one-piece body and “short” face-to-face dimensions. Depending on the application, both horizontal and vertical installation is possible. Not recommended for gas or steam service.

Unit of Measure

Items	9603V 2 1/2" GLC® Cast Iron Body Check Valve 316 SS Class 250 FF	9602V 2 1/2" GLC® Cast Iron Body Check Valve Bronze Trim Class 250 FF	9597V 2 1/2" GLC® Cast Iron Body Check Valve 316 SS Class 125 FF	9596V 2 1/2" GLC® Cast Iron Body Check Valve Bronze Trim Class 125 FF	9626V 3" GLC® Cast Iron Body Check Valve Bronze Trim Class 250 FF
Series	N/A GLC®
Size	N/A 2.50 in	N/A 2.50 in	N/A 2.50 in	N/A 2.50 in	N/A 3.00 in
ASME CLASS	N/A 250	N/A 250	N/A 125	N/A 125	N/A 250
Dimension A	N/A 5.50 in	N/A 5.50 in	N/A 5.50 in	N/A 5.50 in	N/A 6.00 in
Dimension B	N/A 7.50 in	N/A 7.50 in	N/A 7 in	N/A 7 in	N/A 8.25 in
Weight	N/A 30 lb	N/A 30 lb	N/A 24 lb	N/A 24 lb	N/A 36 lb
Temperature Rating	N/A 0 to 200 ºF-18 to 93 ºC	N/A 0 to 180 ºF-18 to 82 ºC	N/A 0 to 200 ºF-18 to 93 ºC	N/A 0 to 180 ºF-18 to 82 ºC	N/A 0 to 180 ºF-18 to 82 ºC
Pressure Rating	N/A 400 psig	N/A 400 psig	N/A 200 psig	N/A 200 psig	N/A 400 psig
Body¹	N/A A126 Class B
Trim²	N/A 316 SS	N/A Bronze	N/A 316 SS	N/A Bronze	N/A Bronze
Seat³	N/A A351 CF8M	N/A B584 836 - Bronze	N/A A351 CF8M	N/A B584 836 - Bronze	N/A B584 836 - Bronze
Spring	N/A A313 T302 Stainless Steel	N/A A313 T302 Stainless Steel	N/A A313 T302 Stainless Steel	N/A A313 T302	N/A A313 T302 Stainless Steel
Bushing	N/A 316	N/A B584 836 - Bronze	N/A 316	N/A B584 836 - Bronze	N/A B584 836 - Bronze
Available Soft Seat Materials	N/A Buna-N (-70 to 250ºF)
ENDS	N/A Flanged (FF)
Applications	N/A Chemical Lines Cooling Towers Crude & Refined Product Lines Evaporators Generator Inlet & Discharge Hydraulic Lines Metering Pumps Mine Dewatering Process Lines Pump Discharge Vacuum Breaker Water Lines Water Treatment
Body Material	N/A Cast Iron
¹ Not recommended for gas or steam service. ² 316 stainless steel trim recommended for temperatures from 180°F to 200°F. ³ Buna-N soft seat available for bubble-tight shutoff.