Find My Check Valve
  • Restrictor Threaded In-Line Check Valves

    The DFT® Restrictor Check Valve (RCV) is a versatile, all-purpose, spring-assisted, in-line check valve for applications that require higher cracking pressures to open the check valve than those offered by other DFT® check valves. Cracking pressures are available from 2 to 40 psi. Like the Basic-Check® valve, the Restrictor Check provides reliable, low maintenance service for a wide range of fluids and gases at various pressure/temperature combinations. The valve consists of a guard cage, spring, valve disc, retaining ring and seat. It can be combined with pipe fittings such as couplings, drain elbows, etc. (not provided by DFT®) to form a complete check valve unit ideally suited for a broad range of applications. The RCV should not be considered a substitute for a Pressure Relief Valve.
    Not recommended for use on discharge of reciprocating compressors.

    Warning: Use with extra deep, bell reducer only

    Standard Features:

    • 1/4" to 2 1/2" Line Size
    • Higher Cracking Pressures (2 to 40 psi)
    • 450 to 2500 CWP
    • Threaded Ends
    • Stainless Steel Construction
    • Spring-Assisted Silent Closing
    • Horizontal or Vertical Installation
    • Tight Shutoff - Lapped Disc & Seat

  • SCV-R® In-Line Restrictor Check Valves

    The SCV-R® Check Valve is a non-slam Spring-assisted check valve designed for applications requiring "higher cracking pressures" than the DFT Model SCV® check valve. The SCV-R® check valve is a self-contained check valve that installs directly in a pipeline and contains all the proven features of the SCV® check valve.

    Standard Features:

    • 1/2" to 2" Line Size
    • 750 CWP
    • NPT & SW Ends
    • Stainless Steel Construction
    • Inconel® X-750 Spring
    • Spring-Assisted Silent Closing, Non-Slam
    • Cracking Pressures: 0.8 to 40.8 psig
    • Zelon® "O" Ring Body Seal
    • Horizontal or Vertical Installation
    • Body Guided Disc
    • Tight Shutoff Lapped Disc & Seat
    • Easy Maintenance
    Notes:
    • 3" is not Available
    • Contact DFT® for Other Cracking Pressures.
    • 750CWP is Rated to 470ºF.