Find My Check Valve
Request Information
The DFT® Basic-Check® valve is a versatile all-purpose, spring-assisted, in-line check valve that provides reliable, low maintenance service for a wide range of liquids and gases at various pressure/temperature combinations. The valve consists of a guard cage, spring, valve disc, retaining ring and seat. It can be combined with pipe fittings such as reducing couplings, drain elbows, etc. to form a complete check valve unit ideally suited for a broad range of pipeline applications or incorporated into machinery for OEM applications. The metal-to-metal sealing area of the Basic-Check® valve’s disc and seat is precision lapped, providing very tight shut-off of both gas and liquid. If bubble-tight shut-off is required, resilient soft seats are available.
Unit of Measure

Specifications

Series

 N/A Basic-Check®

Size

 N/A 0.38 inDN 10

Line Size Inlet (FNPT) A

 N/A 0.38 in

Style

 N/A BSE

Outside Thread (MNPT) B

 N/A 1.00 in

Friction Loss (Feet of Pipe)

 N/A 7

Friction Loss (Meter of Pipe)

 N/A 2.1
Valve Cracking Pressure1 N/A 0.6 psi16.7 in.water424 mm.water31.1 mmHg0.041 bar

Valve Cracking Pressure Tolerance

 N/A ±10%

Approx. Net Weight Each

 N/A 0.38 lb0.2 kg
Cold Working Pressure2
N/A 0 psig2500 psig0 barg172 barg

ENDS

 N/A NPT

Cv

 N/A 5.8

Materials of Construction

Seat

 N/A 303 SS

Disc

 N/A 316 SS

Guard

 N/A 17-4 SS

Spring

 N/A Inconel®

Retaining Ring

 N/A 316 SS

Codes and Standards

ANSI

 N/A B1.20.1

MSS

 N/A SP-25

Features

N/A

  • 1/4" to 2 1/2" Line size
  • 450 to 6000 CWP
  • Threaded ends
  • Stainless Steel Construction
  • Spring-assisted silent closing
  • Horizontal or vertical installation
  • Tight shut-off - lapped disc & seat
  • Easy Maintenance
  • Versatile

Options

Options

 N/A
  • Inconel® 750 Spring
  • Soft seat

Application

N/A Autoclaves Boiler Feed & Discharge Chemical Lines Compressor Discharge Condensate Lines Cookers Cooling Towers Crude & Refined Product Lines Cryogenics Digester Evaporators Fly Ash System Generator Inlet & Discharge Hydraulic Lines Metering Pumps Mine Dewatering Nitrogen Purge Process Lines Pump Discharge Refrigeration Steam Lines Vacuum Breaker Water Lines Water Treatment

Inventory

Inventory

 N/A {0}
  • 1 Cracking pressure for vertical flow will be slightly different: upward flow, slightly higher; downward flow, slightly less.
    Not recommended for use on discharge of reciprocating compressors.
  • 2 Contingent on service ratings of matching pipe and fittings.